Specna Arms V2 Trigger Switch (Rear)

SHS have released a basic replacement of the trigger block - this piece consists of just the sliding contact & the trigger contact block; there is no wiring included. This is only for V3 gearboxes e.g. AK-series, G36 etc

This is for the more technically minded as you will need to solder on wires and connectors for the motor and for the battery. The choice of wiring is down to the individual and their gearbox shell (some have narrower channels than others), though what most people use is 16 AWG. From there you just route the cables whichever way you prefer (exit out the front of the gearbox shell or the rear), and put on your connector of choice e.g. Deans, Tamiya, XT60 etc. For the motor you can either solder the wires directly, or you can put on spade connectors.

Installing this takes a considerable amount of work, and requires near-complete disassembly of the gearbox and soldering. Not recommended for beginners to airsoft tech-work.